如果觉得我的文章对您有用，请随意打赏。你的支持将鼓励我继续创作！
你好
Hi.
我安装了S7 1200和一些Profinet设备，还有一个KTP Profinet屏幕。我必须放置一张CP 1243-1卡？？对安装进行遥控。我可以使用这张卡，路由设备和KTP屏幕吗？
I have an installation of S7 1200 with some Profinet devices and also a KTP Profinet screen. I have to place a CP 1243-1 card ?? to do telecontrol with the installation. Can I do with this card, routing the devices and the KTP screen?
顺致敬意，
Best Regards.
Tnx。
Tnx.
你好，JRomero_INOVAK
Hello JRomero_Innovak
您到底使用哪种TIA Portal版本？
Which TIA Portal Version do you use exactly?
您到底使用哪个HMI面板（请提供订单号）？
Which HMI Panel do you use exactly (Ordernumber please)?
您想使用路由在HMI上传输面板项目，还是想使用路由连接在PLC和HMI之间进行通信？
Do you want to use a routing to transfer the Panel Project on the HMI or do you want to use a Routing Connection for communication between PLC and HMI?
你有网络配置的图纸吗？我们可以看看路由应该如何工作？
Do you have a drawing of your network Konfiguration, that we can see how the routing should work?
再见穆罗夫
Bye Murof
你好，穆罗夫。
Hello Murof.
坦克为你提供支持。
Tanks for your support.
我有TIA Portal V13 SP1 Update5。HMI面板是KTP900＜br/＞是6AV2123-2JB03-0AX0型。在安装过程中，
S7-1214C CPU、HMI和其他设备通过Profinet网络连接
。一旦与
CP1243-1（通过VPN）建立通信，
就必须能够访问Profinet网络，以便
能够监控CPU程序，并在必要时修改CPU的软件
和HMI面板
致以最诚挚的问候。
I have TIA Portal V13 SP1 Update5. The HMI panel is the KTP900
is the type 6AV2123-2JB03-0AX0. In the installation,
an S7-1214C CPU, the HMI and other devices are connected
via a Profinet network. Once the communication with the
CP1243-1 (via VPN) is established, it would be necessary
to be able to access the Profinet network in order to be able
to monitor the CPU program and modify the software of the CPU
and the HMI panel, if necessary.
Best Regards.
...访问，就会收到附加错误，说明模块不支持通过Profibus DP路由。根据CPU数据表，它显示了模块支持路由功能。谁能澄清并提供支持文件。 We are using S7 400H PLCs having MLFB 6ES7412-3HJ14-0AB0. Currently I am able to access Profibus PA devices using PDM 6....
...题描述你好固件更改后，CPU（6ES7 416-2XN05-0AB0）停止作为路由器工作。告诉我如何解决这个问题。多个变频器（micromaster）通过profibus连接到CPU。CPU连接到工业以太网PC。 Hello. The CPU (6ES7 416-2XN05-0AB0) stopped working as a router after a chang...
问题描述你好 Hi,如何通过以太网使用两个主DP CPU创建路由？？？ what can I do to create routing with two MASTER DP CPU by ethernet???以太网中的PG/PC接口已经足够了？？？也有2个不同的DP NEtwork？？？ its' enough assing PG/PC interface in ethernet??? also w...
问题描述你好 Hi, 可以使用STEP7 V11进行路由。 It is possible to do ROUTING with STEP7 V11.我的电脑通过以太网连接到315 PN/DP，我想下载到我的HMI Confort Panel（通过PROFIBUS连接到315PN/DP）。 My PC is connected to a 315 PN/DP via Ethernet and I want to download...
...一个备用IP地址的现有网络中。通常我们会放一个便宜的路由器，将端口转发到需要从现有网络访问的端口，但我想知道西门子是否有任何设备可以用于此+我在X200交换机中使用的功能？ Now I have a project where I have to integrate my profi...
...PLC#1具有CP343-1精益以太网卡，它已被用于将编程设备通信路由到PLC2，但由于某些原因，路由已不再工作。 PLC #1 has CP343-1 Lean ethernet card, and it has been used to route the programming device communication into PLC2, but however now for some reason the routing...
问题描述你好 Hi,我想通过Wi-Fi路由器D-link（普通家庭路由器）将MP277_F_iwlan连接到CPU317F_2PN/DP， I would like to connect a MP277_F_iwlan to a CPU317F_2PN/DP via a Wi-Fi router D-link(normal home router),所以我们有故障保护PLC和故障保护HMI， so we have failsaf...
...is:事件ID:0xF9C1:0x432A/0x00000000 EventID: 0xF9C1:0x432A / 0x00000000在路由表中找不到所用远程子网ID的条目。 No entry was found in the routing table for the remote subnet ID used.PLC1具有MPI地址2（CP343-1具有MPI位址3） PLC1 has MPI adress 2 (the CP343-1 has MPI adress 3...
...源，那么必须在它们之间放置一些东西来解决问题（例如路由器）。 Please mention, that IP addresses are fixed, there is no need to change them. If your application on the "other side of the wire" requires single data source with fixed address - then you have to put something...
...描述你好 Hello,我需要在所有315 PN/DP cpu的网络设置中应用路由器地址。 I need to apply router address in the network settings in all of our 315 PN/DP cpu's.有人知道这是否可以在cpu运行且不下载新硬件的情况下完成？？ Does anybody know if this can be done...
如果觉得我的文章对您有用，请随意打赏。你的支持将鼓励我继续创作！