Y_LINK输入PLCY_LINK In PLC

问题描述

你好

Hi,

在PLC中使用Y_LINK的实际目的是什么？

What is the actual purpose of using Y_LINK In PLC?

推荐答案2

你好，chet；

Hello chet;

以下常见问题解答中对使用Y-Link作为冗余H系统CPU和标准Profibus从站之间的网关进行了很好的解释：

There is a very good explanation of the use opf a Y-Link as a gateway between redundant H-system CPUs andstandard Profibus slaves in the following FAQ:

-

Y链接的结构如何？

How is the Y link structured?

描述

Description

Y链路用于将只有一个DP接口的远程IO设备连接到冗余H系统。

The Y Link is used to connect remote IO devices that have only one DP interface to a redundant H system.

Y链路由两个IM 153-2接口模块和一个Y耦合器组成。

The Y link consists of two IM 153-2 interface modules and a Y coupler.

Y链路通过接口模块连接到冗余DP主系统。远程IO设备通过Y耦合器连接到Y链路，即：

The Y link is connected to the redundant DP master system via the interface modules. The remote IO devices are connected to the Y link via the Y coupler, i.e.:

Y链路创建一个从冗余DP主系统到单边DP主系统的网关。

The Y link creates a gateway from a redundant DP master system to a unilateral DP master system.

有关Profibus网络接口的更多信息，请参阅本手册：

More information can be found in this manual on Profibus network interfaces:

SIMATIC总线连接DP/PA耦合器、有源磁场分配器、DP/PA连接和Y连接

SIMATIC Bus links DP/PA coupler, active field distributors, DP/PA Link and Y Link

希望这能有所帮助，

Hope this helps,

丹尼尔·查蒂尔

Daniel Chartier

推荐答案3

很好的解释dchartier

Good explaination bydchartier

推荐答案4

用简单的语言进行非常详细和良好的解释。

Very detailed and good explation in simple words. .

推荐答案5

亲爱的朋友：，

Dear Friend,

根据我的想法，Y链接是一种设备，用于在冗余Profibus主站与标准Profibus从站之间进行通信。

As per My idea Y link is a Device to make the communication between redundant Profibus Master to Standard Profibus Slave.

这通常用于将驱动器（vfd或DC驱动器）与H系统通信。

Mostly this is used to communicate Drive(vfd or DC Drives ) to H-system.

当做

Regards,

Avinashkrishna Bhimavarapu公司

Avinashkrishna Bhimavarapu

推荐答案6

还应注意，操作员面板（按钮面板除外）通过Y链接与H控制器的连接是not 已发布。

It should also be noted that the connection of operator panels - except Push Button Panels - to an H controller via a Y link is not released.

当做

Regards,

MRG公司

MRG

推荐答案7

您也可以使用两个profibus repeter代替Y-LINK。

You can use two profibus repeters also instead of Y-LINK.

在这种情况下，您必须打开和关闭专用中继器，以连接到冗余主设备的单profibus连接的从设备。

In this case you have to switch on & off the perticular repeater for conenctions to slaves with single profibus connection from the redundant masters.

您必须使用PLC DO作为中继器电源。你可以根据哪个CPU成为主CPU来进行开关操作。

You have to use PLC DO for repeater supply.That DO you can make on & off as per which CPU is becoming Master.

推荐答案8

你好

Hello,

对于HMI通信，这是可以的。

For HMI Communication it is ok.

但如果我能用它和RIO交流呢？

But what if i could use it to communicate with RIO?

我确信它不会提供无冲击转换。

I am sure that it will not give bumpless changeover.

推荐答案9

我同意Amit_86

I'm agree with Amit_86

切换时间可能需要2秒钟。两秒钟的监控时间并不长，但对控制系统来说时间太长。

Changeover time may take up to 2 seconds. Two seconds isn't a long time for monitoring, but too much time for control system.

推荐答案10

你好

Hello,

推荐答案11

你好，艾曼，

Hello Ayman,

这是我在一个项目中的个人经历。

This is my personal experience in one of the my projects.

有些自动化应用程序速度很快，有些则很慢。在这种情况下，我同意你的看法。

Some automation application are fast and some of them are slow. I'm agree with you in this case.

但此时，它可能会丢失一些瞬时信号。

But at this time, it may be lose some of the momentary signals.

当做

Regards,

MRG公司

MRG

推荐答案12

推荐答案13

对不起，艾曼。我不同意这一点。

Sorry Ayman. I am not agree for this.

它也依赖于过程自动化的应用。。。

it depands lot on appication in Process Automation too...

推荐答案14

这篇帖子真的很有帮助，帖子的简洁和清晰使它很容易理解这个主题。

This post is really helpfull,the simplicity and lucidity of the post makes it quite easier to understand the topic.